| |
|
|
 |
|
|
Main Features:
The basic structure consists of an all steel base, mast and turntable. The base has front and rear slots to allow a forklift truck to move the machine safely and easily within the workspace. The mast is of special profile design, inside which, the electrical cabinet, film carriage and drive motor are situated. As standard there is a quality powder coat finish, with no external wiring or limit switches. Clear identification labels aid simple operation.
|
- Hinged mast
- 1650mm diameter turntable
- Soft start/stop by frequency inverter with return to start position
- Powered film carriage with variable speed and safety cut out on base to prevent trapping
- 4 Pallet wrapping programs: single 1, single 2, cross wrap, rainproof
- Independently adjustable top and bottom reinforcing wraps
- Dependently adjustable reinforcing wraps at any point in the cycle
- Automatic load height detection by photocell, with adjustable top overlap
- PLC controlled, with bespoke display control panel
- Ergonomically designed control panel
|
|
|
|
| Model |
BEX 200 |
| Max. Pallet Size |
1200 x 1100 x 2400 (h) mm |
| Max. Pallet Weight |
2000 kg |
| Power Requirements |
230 Volt Single Phase |
| Pneumatic Requirement |
N/A |
| Turntable Diameter |
1650mm | | | |
| |
 |
|
|
Main Features:
The Robospir is a self propelled battery powered robotic pallet wrapper driven by twin 24V electric motors. Capable of wrapping loads of any weight and area up to 2350mm in height. It can be used in warehouses with restricted space where a conventional turntable pallet wrapper permanently sited would command too much floor space. When not required it can simply be manoeuvred out of the area and the floor space used for another purpose. Because of its compact dimensions the Robospir requires a much smaller working area than most robots. An 100% power pre-stretch system is fitted as standard together with variable speed control for reel carrier rise and fall. PLC unit controls top/bottom and intermediate wraps with 6 pre-programmable settings. Battery can be recharged from standard 240 volt power supply when not in use.
|
- Overall dimensions: 1066mm x 738mm x 1560mm high
- Machine weight: 195 kg (batteries included)
- Powered by: 4 batteries—24V
- Power requirements: 220-240V single phase—6A
- Max. pallet height: 2350mm
- Min. pallet dimensions: 700mm x 900mm x 500mm high
- Gross weight: 220kg
- Film Requirements: Stretch PE
- Width: 500mm
- Thickness: 19-40 mu
- External diameter: 220mm
- Internal core diameter: 76mm
|
| |
| | |
|
|
