| |
|
|
|
|
- Rotary medical sealers for sealing and coding sterile pouches made from Tyvec or paper/polypropylene.
- LCD display for parameter settings and programming with energy saving standby function – machine starts via an optical sensor.
- Digital temperature control, seal temperature range 50oC - 210oC, with automatic infeed block if temperature varies over +/-5oC.
- Self adjusting pressure wheels adapt to pouch thickness, 12mm (15mm on MPCV) with multi line seal wheels, operates at 10m/min.
- Internal 9 dot matrix printer for production date, expiry period, time, operator names, batch numbers, counter and symbols to EN980 standard. (Not included on MD).
- MPCV model can be connected to a PC for programming.
- MPCV models can be used for validation with temperature, seal pressure and speed monitoring equipped with infeed block for temperature, speed and seal pressure variation.
|
- Stainless steel support tables and roller conveyors
- Bar code scanner and PC software (MPCV models only)
- Label printer with bar code capability (MPCV models only)
|
|
|
|
|
|
|
|
- 520mm, 720mm and 1020mm Validated bag sealing. 8mm weld width
- Validation of seal time, seal temperature and seal pressure
- Multi cycle gas flush for modified atmosphere packing
- Both jaws heated for sealing laminates and thick pouches
- 9 programs to store all settings for different bags
- Very user friendly digital control
- Pneumatic operation for very strong sealing and long term reliable operation
- Self contained vacuum pump
- Designed for clean room operation
|
- Horizontal or vertical operation with the optional floor stand
- Bag support
- External vent
- Calibration certificate
- Data upload
|
|
| |
|
| Model |
MV520 MED |
MV720 MED |
MV1020 MED |
| Sealing Jaw Width |
520mm |
720mm |
1020mm |
| Element Width |
8mm |
8mm |
8mm |
| Power Requirement |
230V Single Phase 50/60Hz |
230 V Single Phase 50/60Hz |
230 V Single Phase 50/60Hz |
| Pneumatic Requirement |
6-8 bar |
6-8 bar |
6-8 bar |
|
 |
|
|
- Developed specifically for the Medical and Pharmaceutical Industries where accurate control of weld quality is required for validation
- PLC controller continually accurately measures the sealing jaw temperature compensating for any deviation from the set temperature.
- Seal time is measured to the tenth of a second along with the pneumatic pressure.
- One or both jaws heated with separate temperature settings
- Pneumatic operation to give consistent seal pressure
- Full calibration and validation available
- Multi level password protection of settings
- 10 pre-set parameters with alphanumeric description
- Batch counter
- Cycle data stored for uploading onto spreadsheet
- Suitable for use in a clean room
- Seals a wide range of thermoplastic films/laminates including Tyvec
|
- Automatic flying knife-cutting system
- Optional constantly heated sealing jaws
- Twin parallel welds
- Water cooled sealing jaws
|
|
| |
|
| Model |
MS400 |
MS600 |
MS800 |
| Sealing Jaw Width |
400mm |
600mm |
900mm |
| Element Width |
9.5mm |
9.5mm |
9.5mm |
| Cutter Option |
Flying knife |
Flying knife |
Flying knife |
| Power Requirement |
Single Phase 13A |
Single Phase 13A |
Single Phase 13A |
| Pneumatic Requirement |
6-8 bar |
6-8 bar |
6-8 bar |
|
 
|
|
Follow @sontexmachinery
